When the meter is set to repeat or automatic or synro in the storing settings, the instrument will automatically save every measurement. 

​

If you want to save your settings for next time, to save you amending the settings each time. Save a setup file. 

​

To save the setup file, use the STORE/RECORD key once and a file name will appear at the top of the screen. 

​

To reload a SETUP file or a previous measurement file, press the RECALL button and navigate to the setup file. 

​

TIP: You might need to press the INC or DEC key to change the on-board memory to the SD-Card if you cannot find the files. 

​

Setup files are normally on the internal memory. 

Measurements are normally saved on the SD card. 

​

If you are stuck in the SETUP menu, press the EXIT key on the bottom of the keypad.