Step 2:

Attach 2 x 70-90 mm jubilee clips to the mounting plate. 

Step 3:

Place the mounting bracket back onto monitor chassis. (note: it may be a tight fit due to the clips) 

​

Step 4:

Reattach the mounting pin on the bottom of the monitor.

Step 5:

Tighten the jubilee clips around the tripod centre post and insert into the tripod.

​

TIP:

Always install the monitor with the inlet facing up. 

Designed to be mounted 1.5 metres above the ground.

​

How to Wall Mount: 

​

Fix the monitor to the wall (or hoarding) using 4 screws & 4 heavy-duty wall plugs if required. Ensure it is firmly in position with the screws as shown below.

(Screws not supplied - installer needs to select the appropriate screws based on the material the monitor is being affixed to.)