norsonic noRCONNECT

Nor1051 Software

The NorConnect software is used for downloading your measurements from the Nor145 or Nor150.

NORSONIC NORCONNECT

NorConnect is a measurement suite and data management program for measurement files downloaded from Nor145 and Nor150.

NorConnect is freeware and is a part of the instrument delivery.

The program supports all communication environments offered by the new generation of instrumentation and measurement hardware and enables remote connection via modem, WLAN or LAN.

The software can be downloaded here:

Norsonic.com/downloads

My DM30 dust monitor is powered on, but not data is coming through, why is this?

Generally, if the monitor is powered on (you see a green light inside the cabinet), yet is not sending data to the cloud, this will be due to a lack of signal at the current location. Try relocating the monitor to another position on site. If data is still not coming through, please contact our support team for assistance.
My DM30 monitor is showing red on Sonitus Cloud, why is this?

Generally, this will be an indication that the monitor is not receiving power. Please check all cables are attached correctly and have not been damaged. If the monitor is powered by battery, please make sure this is charged. Due to low voltage protection features of the monitor, a battery with charge percentage below 30% should be considered flat and will need to be charged.