Noise Monitor

The EM2030 is intended for use in situations where you need reliable noise measurements with the minimum amount of effort.

TIP: when fixing the mounting rail to the rear of the cabinet, use a washer to make a space between the rail & the box. This will allow a slot for the microphone right angle bracket to slot into.

When mounting the unit on the side of a building or hoarding, use a long pole to extend the microphone at least 1 metre from the facade.

mounting the microphone:

Microphone should be mounted at a height of 1.4m to 4m depending on the receptor, in free field away from any reflective surfaces.

If the unit is fixed to a fence line or barrier, the unit should be mounted above the top of the barrier.

Examples below:

Width

Height

Depth

Weight

295mm

195mm

150mm

<4kg

Plug power supply into the mains AC connector at the bottom of the cabinet. As indicated below.

Power off:

Remove power supply from the mains AC connector at the bottom of the cabinet.

Power Supply options:

40Ah Battery | 110/240v mains.

prefer to email us?